Cummins RS80 Quiet Connect 80kW Generator 277/480V 3 Phase NG/LP | RS80

The Cummins RS80 Quiet Connect 80kW Generator 277/480V 3 Phase is a commercial-grade standby power solution built for demanding environments. Designed for small businesses, industrial sites, and critical facilities, this 80kW standby generator delivers dependable three phase power with advanced electronic controls, extreme weather capability, and quiet operation.

Engineered in the USA and backed by Cummins’ proven reputation, the RS80 provides seamless backup power when the grid fails. It supports both natural gas and LP propane, giving operators flexibility while maintaining consistent 80kW output across fuel types.

If you require reliable 277/480V 3 phase generator performance for commercial backup power, this model sets the benchmark.

---

Cummins 80kW Generator Built for Commercial Backup Power

The Cummins RS80 generator is purpose-built for businesses that cannot afford downtime. Whether protecting manufacturing equipment, medical facilities, agricultural operations, or commercial buildings, this 80kW standby generator ensures operational continuity.

Wichtigste Leistungsmerkmale

• Nennausgangsleistung: 80kW (NG or LP)

• Stromspannung: 277/480 Volt, Drehstrom

• Nennstromstärke: 120 Amps

• Frequenz: 60 Hz

• Mainline Breaker: 150 Amps

• Decibel Rating: 73 dBA (Sound Level 1 enclosure)

• Wind Rating: Up to 180 MPH

This three phase power system is ideal for facilities running heavy-duty equipment, elevators, HVAC systems, refrigeration units, and commercial machinery.

---

Motorleistung und Zuverlässigkeit

At the heart of the Cummins RS80 Quiet Connect 80kW Generator 277/480 Volts 3 Phase NG/LP | RS80 is a 5.9-liter inline 6-cylinder turbocharged and aftercooled engine.

Motorspezifikationen

• Liquid-cooled design

• Gusseisenblockkonstruktion

• Betrieb mit 1800 U/min

• 12-volt starting system (850-amp capacity down to 0°F)

• Schraubölfilter mit Überdruckventil

Liquid-cooled standby generators outperform air-cooled units in high-demand environments. They maintain stable operating temperatures during extended runtime and heavy load conditions.

From a professional standpoint, 1800 RPM generators typically last significantly longer than high-speed models. Lower RPM reduces wear, vibration, and maintenance frequency.

---

Extreme Weather Operation Down to -40°F

Many generators fail under extreme conditions. The RS80 does not.

This industrial standby generator is designed to start and operate in temperatures as low as -40°F with proper cold weather accessories. That makes it suitable for northern climates and critical infrastructure applications.

The advanced aluminum enclosure:

• Is powder-coated for corrosion resistance

• Withstands wind loads up to 180 MPH (ASCE 7-10 compliant)

• Provides easy-access service doors

For hurricane-prone or severe-weather regions, this enclosure design adds structural security that many competitors lack.

---

PowerCommand 1.1 Steuerungssystem

The RS80 features the PowerCommand 1.1 control, one of the most trusted electronic control systems in commercial standby generators.

What It Does

• Automatischer Start und Stopp

• Ausgangsmessung

• Fehlererkennung und automatische Abschaltung

• Voltage regulation to ±1%

• Frequenzregelung auf 0,25% bei 60 Hz

• NFPA 110 Level 1 capable (with proper installation)

Precise voltage and frequency regulation protect sensitive electronics, motors, and control systems. In commercial backup power installations, this level of regulation prevents equipment damage and ensures compliance.

---

277/480V 3 Phase Generator for Industrial Applications

A 277/480V 3 phase generator is typically required for:

• Lagerhallen

• Produktionsanlagen

• Large office buildings

• Krankenhäuser

• Landwirtschaftliche Betriebe

• Rechenzentren

Three phase power allows balanced load distribution and supports larger motor loads efficiently. Compared to single-phase systems, it delivers smoother power output and higher energy efficiency.

The Cummins RS80 generator integrates seamlessly into existing three phase power systems with an automatic transfer switch.

---

Quiet Connect Generator Technology

The Quiet Connect series is engineered for reduced operational noise without compromising performance.

Sound Level 1 Enclosure Benefits

• 73 dBA operational sound level

• Aluminum construction

• Powder-coated corrosion resistance

• Easy-access service panels

For comparison, 73 dBA is comparable to moderate street traffic. For an 80kW standby generator, this is considered impressively quiet.

This makes it suitable for commercial areas with noise ordinances.

---

Brennstoffflexibilität: Erdgas oder Flüssiggas

The Cummins RS80 Quiet Connect 80kW Generator 277/480 Volts 3 Phase NG/LP | RS80 supports both natural gas commercial generator applications and LP propane setups.

Kraftstoffverbrauch

Erdgas:

• 1083.5 cu ft/hour (full load)

• 678.7 cu ft/hour (half load)

LP Propane:

• 11.56 gallons/hour (full load)

• 7.23 gallons/hour (half load)

Field-selectable fuel type simplifies installation and future conversion.

From an operational perspective, natural gas is often preferred for permanent commercial installations due to continuous supply access. LP propane offers independence in remote locations. Cummins RS80 Quiet Connect 80kW Generator 277/480V 3 Phase

---

Installation and Setup Considerations

Für optimale Leistung:

1. Auf einer vorbereiteten Betonplatte montieren.

2. Pair with a properly rated automatic transfer switch.

3. Ensure fuel supply meets required pressure and volume.

4. Confirm compliance with local electrical codes.

5. Consider cold weather kits for sub-zero climates.

Professional installation is strongly recommended for any industrial standby generator.

---

Konformität und Zertifizierungen

The Cummins RS80 generator meets key industry standards:

• UL-2200-gelistet

• U.S. EPA emissions compliant

• IBC-erdbebensicher

• NFPA 110-fähig

Compliance ensures the standby power solution is suitable for regulated commercial and institutional environments.

---

Abmessungen und physikalische Spezifikationen

• Länge: 118,7 Zoll

• Breite: 40 Zoll

• Höhe: 58,3 Zoll

• Weight: 2782 lbs

Due to its size and weight, planning for delivery access and crane placement may be required.

---

Expert Insight: When an 80kW Standby Generator Is the Right Choice

In real-world commercial settings, an 80kW standby generator is typically selected when:

• Load demand ranges between 60–75kW continuous

• Multiple large motors operate simultaneously

• Business continuity is critical

• Three phase power is mandatory

A proper load calculation should always be performed before purchasing. Oversizing or undersizing affects efficiency and performance.

---

Garantie und Support

Cummins includes a 2-Year Base Warranty for both consumer and commercial applications, with extended coverage options available.

For businesses, extended warranties provide additional operational security and budgeting predictability.

---

Why Choose the Cummins RS80 Generator?

• Proven 5.9L turbocharged engine

• Precision PowerCommand 1.1 control

• 277/480V three phase capability

• Quiet Connect sound reduction

• Extreme weather readiness

• Robustheit in Gewerbequalität

• Dual fuel flexibility

Der Cummins RS80 Quiet Connect 80kW Generator 277/480 Volts 3 Phase NG/LP | RS80 stands out as a long-term investment in reliable commercial backup power.

---

Abschluss

The Cummins RS80 Quiet Connect 80kW Generator 277/480V 3 Phase is engineered for serious commercial performance. With a liquid-cooled 5.9L engine, advanced PowerCommand 1.1 control, extreme weather capability, and 277/480V three phase output, it delivers dependable standby power when it matters most.

For facilities that require uninterrupted operations, this Cummins 80kW generator provides the durability, precision, and compliance necessary for demanding environments. Kontaktieren Sie uns 

---

1. Welche Kraftstoffarten unterstützt der Cummins RS80?
The generator operates on natural gas or LP propane and is field-selectable.

2. Is the RS80 suitable for commercial buildings?
Yes, it is designed for commercial and industrial standby applications requiring three-phase power.

3. Welche Spannung liefert dieser Generator?
It delivers 277/480 Volts 3 Phase at 60 Hz.

4. How loud is the Cummins RS80 generator?
Mit dem Gehäuse der Schallschutzklasse 1 arbeitet es bei etwa 73 dBA.

5. Does it comply with NFPA 110?
Yes, it is NFPA 110 capable with proper accessories and installation.

6. Can it operate in cold climates?
Yes, it is designed to start in temperatures as low as -40°F with appropriate cold-weather equipment.

7. What type of engine does it use?
A 5.9-liter inline 6-cylinder turbocharged, liquid-cooled Cummins engine.

8. What warranty comes with the RS80?
Cummins provides a 2-year base warranty with extended options available.